{"loaderData":{"0-5":{"posts":[{"id":2143,"slug":"how-to-make-a-diy-lacrosse-goal-transporter","title":"HOW TO: Make a DIY lacrosse goal transporter","content":"\n

There are several products on the market that make it easy to move your lacrosse goal. I investigated them and then created my own to save my yard, my back, and my money. An added bonus is you can store your goal on the transporter to keep it off the ground and free from dirt and moisture.

\n\n\n\n

This is especially helpful if you have ECD targets, a Smart Backstop shooting net, and a Lax Dog strapped to your goal, which makes it quite heavy! These are not affiliate links, I don't make any money off them. Just thought I'd share the links because we really enjoy these products.

\n\n\n\n

Hopefully this article helps out my brothers and sisters in the lax community.

\n\n\n\n

\n\n\n\n

Parts

\n\n\n\n

1 - 4x4x8' #2 Ground Contact Green pressure-treated timber - $10.30

\n\n\n\n

1 - 2x4x8' #2 Ground Contact Green pressure treated lumber - $3.89

\n\n\n\n

1 - 21\" #2 Ground Contact Green pressure-treated timber - $0.00 *

\n\n\n\n

19 - #9 2 1/2\" coated deck screws - $0.00 *

\n\n\n\n

2 - 5/8\" x 8\" galvanized lag screws - $3.39 (these become the wheel axles)

\n\n\n\n

2 - 8\" Pneumatic Utility Tire (no flat) - $20.57 (comes with plastic spacers - you could cut a small pipe to make a spacer too)

\n\n\n\n

* Already had these items in my shop from previous projects.

\n\n\n\n

Total: $38.15

\n\n\n\n

Instructions

\n\n\n\n

Lay the goal on top of the 4x4.

\n\n\n\n

Mark the 4x4 where you want to cut it. Leave a little room on the ends to install a stopper (scroll down to see the picture with the stopper) to prevent the goal from sliding off the end. I left about 2\" of space on either side of the goal.

\n\n\n\n

Cut the 4x4 to the length that makes sense for your goal. I went with 80\" for my 4x4.

\n\n\n\n

Mark the center of each end of the 4x4. Then use a 7/16\" (or the appropriate size bit that is small enough that the threads on the lag screw will still bite into the wood) drill bit to drill a hole as deep as the threads on your lag screw. The lag screws are the axles for the wheels. In my case I used a boring bit, and the hole was over 4\" deep. This is the most important step. If you drill this hole off-center or off-axis the tires will not be aligned properly. If the pressure treated wood is fresh and wet, this could be challenging. Take your time, get it right the first time.

\n\n\n\n

Use a large socket wrench to screw the lag screws into the 4x4 until all the threads are engaged. Don't put your wheel or spacer on yet. Leave them off so you can concentrate on screwing in the screw perfectly. This is the 2nd most important step. If you screw it in on an angle, the tires will not be aligned properly. This is not easy; you will need to put a lot of muscle into this.

\n\n\n\n

Use a large socket wrench to un-screw the lag screws from the 4x4 all the way. Be careful when you take out the lag screw, it could be quite hot from the friction.

\n\n\n\n

Lay the goal on top of the 4x4 and center it.

\n\n\n\n

This picture shows the pieces described in the next set of steps.

\n\n\n\n

\n\n\n\n

Cut some of the 21\" 2x4 to make little stoppers for top ends of the 4x4. You will do this 2 times, one for each end.

\n\n\n\n

Align the stopper on top of the 4x4 and drill holes in the 2x4 stopper you just made. Go all the way through so you mark the 4x4 with holes. Remove the stopper and finish drilling out the holes in the 4x4. You will do this 2 times, one for each end.

\n\n\n\n

Screw the stoppers to the 4x4 with the deck screws. You will do this 2 times, one for each end.

\n\n\n\n

Cut some 2x4 to make a brace for the goal posts to prevent the goal from sliding off the 4x4. I made my braces 8\" long. You will do this 2 times, one for each goal post.

\n\n\n\n

Align the brace on the side of the 4x4 and drill holes in the 2x4 braces you just made. Go all the way through so you mark the 4x4 with holes. Remove the brace and finish drilling out the holes in the 4x4. You will do this 2 times, one for each end.

\n\n\n\n

Screw the brace to the 4x4 with the deck screws. You will do this 2 times, one for each end.

\n\n\n\n

This picture shows the pieces described in the next set of steps.

\n\n\n\n

\n\n\n\n

Align the 2x4 in the middle of the 4x4 make the end flush to the edge of the 4x4. Drill holes in the 2x4 and go all the way through so you mark the 4x4 with holes. Remove the brace and finish drilling out the holes in the 4x4.

\n\n\n\n

Screw the 2x4 to the 4x4 with the deck screws.

\n\n\n\n

This picture shows the pieces described in the next set of steps.

\n\n\n\n

\n\n\n\n

Pass the lag screw through the wheel, add the spacer on the other side, then use the large socket wrench to tighten the screw. You will do this 2 times, one for each end.

\n\n\n\n

Walk around the back of your goal and grab the 2x4 and lift up the goal.

\n\n\n\n

\n\n\n\n

Now, add a little flair and make it easier to lift the 2x4 by adding a custom handle. This beauty was made by my Dad when he created our treehouse when I was a boy. It lives on today as part of our lacrosse transporter! I attached it with 2 deck screws.

\n\n\n\n

\n\n\n\n

Move your goal to a suitable location and rip some Gs!

\n\n\n\n

\n\n\n\n

Here are some more pictures that show everything from a few different angles.

\n\n\n\n

\n\n\n\n

\n\n\n\n

\n\n\n\n

\n\n\n\n

\n","excerpt":"

There are several products on the market that make it easy to move your lacrosse goal. I investigated them and then created my own to save my yard, my back, and my money.

","date":"2024-09-23T22:29:27","modified":"2024-11-20T16:48:07","author":"Todd Baginski","authorSlug":"todd","categories":[{"id":139,"name":"Lacrosse","slug":"lacrosse","count":1}],"tags":[{"id":140,"name":"DIY","slug":"diy","count":1}],"featuredImage":"/blog/uploads/2024/09/fi.jpg","status":"publish"}],"total":1,"totalPages":1,"currentPage":1,"archiveType":"category","archiveName":"Lacrosse","archiveSlug":"lacrosse","archivePathSegments":"lacrosse","categories":[{"id":146,"name":"AI","slug":"ai","count":1},{"id":90,"name":"Blog","slug":"blog","count":2},{"id":103,"name":"Cloud","slug":"cloud","count":68},{"id":102,"name":"Community","slug":"community","count":41},{"id":110,"name":"GitHub","slug":"github","count":4},{"id":139,"name":"Lacrosse","slug":"lacrosse","count":1},{"id":96,"name":"Mobile","slug":"mobile","count":62},{"id":46,"name":"Most Popular","slug":"most-popular","count":19},{"id":88,"name":"Office","slug":"office","count":21},{"id":104,"name":"Office 365","slug":"office-365","count":80},{"id":89,"name":"Operations","slug":"operations","count":13},{"id":121,"name":"PowerApps","slug":"powerapps","count":57},{"id":87,"name":"Publications","slug":"publications","count":17},{"id":97,"name":"SharePoint","slug":"sharepoint","count":58},{"id":84,"name":"SharePoint 2007","slug":"sharepoint-2007","count":22},{"id":98,"name":"SharePoint 2010","slug":"sharepoint-2010","count":40},{"id":99,"name":"SharePoint 2013","slug":"sharepoint-2013","count":20},{"id":106,"name":"SharePoint 2016","slug":"sharepoint-2016","count":6},{"id":118,"name":"SharePoint Framework","slug":"sharepoint-framework","count":1},{"id":83,"name":"Speaking Engagements","slug":"speaking-engagements","count":41},{"id":119,"name":"SPFx","slug":"spfx","count":1},{"id":85,"name":"SPS Events Mobile","slug":"sps-events-mobile","count":4},{"id":116,"name":"Teams","slug":"teams","count":3},{"id":1,"name":"Uncategorized","slug":"uncategorized","count":3},{"id":86,"name":"Windows 8","slug":"windows-8","count":7},{"id":101,"name":"Azure","slug":"azure","count":24},{"id":100,"name":"BCS","slug":"bcs","count":26},{"id":132,"name":"CDS","slug":"cds","count":3},{"id":120,"name":"Flow","slug":"flow","count":18}],"tags":[{"id":10,"name":"Custom Development","slug":"custom-development","count":87},{"id":7,"name":"SharePoint","slug":"sharepoint","count":85},{"id":5,"name":"Helpful Code","slug":"helpful-code","count":70},{"id":54,"name":"Mobile","slug":"mobile","count":66},{"id":45,"name":"O365","slug":"o365","count":65},{"id":112,"name":"PowerApps","slug":"powerapps","count":56},{"id":42,"name":"Cloud","slug":"cloud","count":46},{"id":122,"name":"HOW TO: PowerApps","slug":"how-to-powerapps","count":38},{"id":26,"name":"SharePoint 2010","slug":"sharepoint-2010","count":32},{"id":6,"name":"HOW TO: SharePoint","slug":"how-to-sharepoint","count":31},{"id":57,"name":"Mobility","slug":"mobility","count":28},{"id":3,"name":"Conferences","slug":"conferences","count":27},{"id":41,"name":"Azure","slug":"azure","count":21},{"id":4,"name":"BDC","slug":"bdc","count":20},{"id":40,"name":"Windows Phone 7","slug":"windows-phone-7","count":17},{"id":58,"name":"Android","slug":"android","count":14},{"id":60,"name":"iPad","slug":"ipad","count":14},{"id":68,"name":"SharePoint 2013","slug":"sharepoint-2013","count":14},{"id":23,"name":"Conference Materials","slug":"conference-materials","count":13},{"id":59,"name":"iPhone","slug":"iphone","count":13},{"id":113,"name":"Flow","slug":"flow","count":12},{"id":43,"name":"SharePoint Online","slug":"sharepoint-online","count":12},{"id":28,"name":"BCS","slug":"bcs","count":11},{"id":80,"name":"Windows Phone 8","slug":"windows-phone-8","count":8},{"id":61,"name":"iOS","slug":"ios","count":7},{"id":38,"name":"Magazine Articles","slug":"magazine-articles","count":7},{"id":74,"name":"SharePoint Apps","slug":"sharepoint-apps","count":7},{"id":9,"name":"Workflow","slug":"workflow","count":7},{"id":22,"name":"Development Utilities","slug":"development-utilities","count":6},{"id":37,"name":"MSDN","slug":"msdn","count":6},{"id":25,"name":"Silverlight","slug":"silverlight","count":6},{"id":8,"name":"Virtual Environments","slug":"virtual-environments","count":5},{"id":30,"name":"External Content Types","slug":"external-content-types","count":4},{"id":72,"name":"SharePoint Hosted","slug":"sharepoint-hosted","count":4},{"id":13,"name":"Site Definitions","slug":"site-definitions","count":4},{"id":12,"name":"Site Templates","slug":"site-templates","count":4},{"id":44,"name":"SPO","slug":"spo","count":4},{"id":33,"name":"Visual Studio","slug":"visual-studio","count":4},{"id":55,"name":"WCM","slug":"wcm","count":4},{"id":128,"name":"CDS","slug":"cds","count":3},{"id":127,"name":"Ignite","slug":"ignite","count":3},{"id":115,"name":"SPFx","slug":"spfx","count":3},{"id":14,"name":"SSO","slug":"sso","count":3},{"id":117,"name":"Teams","slug":"teams","count":3},{"id":24,"name":"Hyper-V","slug":"hyper-v","count":2},{"id":126,"name":"IoT","slug":"iot","count":2},{"id":76,"name":"Mapping","slug":"mapping","count":2},{"id":56,"name":"Outlook","slug":"outlook","count":2},{"id":32,"name":"Sandbox","slug":"sandbox","count":2},{"id":21,"name":"SharePoint Certified Architect","slug":"sharepoint-certified-architect","count":2},{"id":11,"name":"SharePoint Designer","slug":"sharepoint-designer","count":2},{"id":108,"name":"SharePoint Framework","slug":"sharepoint-framework","count":2},{"id":34,"name":"Visual Web Parts","slug":"visual-web-parts","count":2},{"id":91,"name":"Xamarin","slug":"xamarin","count":2},{"id":27,"name":".NET Assembly Connector","slug":"net-assembly-connector","count":1},{"id":50,"name":"Access Services","slug":"access-services","count":1},{"id":35,"name":"Aptillon","slug":"aptillon","count":1},{"id":36,"name":"BCS FAQ","slug":"bcs-faq","count":1},{"id":39,"name":"Books","slug":"books","count":1},{"id":148,"name":"Claude","slug":"claude","count":1},{"id":131,"name":"Common Data Service","slug":"common-data-service","count":1},{"id":82,"name":"Community","slug":"community","count":1},{"id":52,"name":"Composites","slug":"composites","count":1},{"id":123,"name":"Containers","slug":"containers","count":1},{"id":92,"name":"Cordova","slug":"cordova","count":1},{"id":65,"name":"CSS3","slug":"css3","count":1},{"id":140,"name":"DIY","slug":"diy","count":1},{"id":124,"name":"Docker","slug":"docker","count":1},{"id":133,"name":"Flows","slug":"flows","count":1},{"id":75,"name":"Geolocation","slug":"geolocation","count":1},{"id":111,"name":"GitHub","slug":"github","count":1},{"id":125,"name":"HOW TO: Flow","slug":"how-to-flow","count":1},{"id":62,"name":"HTML5","slug":"html5","count":1},{"id":49,"name":"InfoPath Forms Services","slug":"infopath-forms-services","count":1},{"id":64,"name":"JavaScript","slug":"javascript","count":1},{"id":63,"name":"JQuery","slug":"jquery","count":1},{"id":66,"name":"JQuery Mobile","slug":"jquery-mobile","count":1},{"id":31,"name":"Lists","slug":"lists","count":1},{"id":69,"name":"Mashups","slug":"mashups","count":1},{"id":19,"name":"MCA","slug":"mca","count":1},{"id":18,"name":"MCM","slug":"mcm","count":1},{"id":79,"name":"Nofifications","slug":"nofifications","count":1},{"id":105,"name":"Office","slug":"office","count":1},{"id":95,"name":"Office Add-ins","slug":"office-add-ins","count":1},{"id":78,"name":"Office Web Apps Server","slug":"office-web-apps-server","count":1},{"id":130,"name":"Operations","slug":"operations","count":1},{"id":129,"name":"PowerShell","slug":"powershell","count":1},{"id":15,"name":"QuickLaunch","slug":"quicklaunch","count":1},{"id":29,"name":"Search","slug":"search","count":1},{"id":107,"name":"SharePoint 2016","slug":"sharepoint-2016","count":1},{"id":71,"name":"SharePoint App","slug":"sharepoint-app","count":1},{"id":20,"name":"SharePoint Certified Master","slug":"sharepoint-certified-master","count":1},{"id":17,"name":"SharePoint Master Certification","slug":"sharepoint-master-certification","count":1},{"id":109,"name":"SharePoint Mobile App","slug":"sharepoint-mobile-app","count":1},{"id":77,"name":"SharePoint Saturday","slug":"sharepoint-saturday","count":1},{"id":73,"name":"SP APP","slug":"sp-app","count":1},{"id":70,"name":"SPAPP","slug":"spapp","count":1},{"id":81,"name":"SPS Events","slug":"sps-events","count":1},{"id":67,"name":"SSS","slug":"sss","count":1},{"id":16,"name":"Top Navigation","slug":"top-navigation","count":1},{"id":94,"name":"Training","slug":"training","count":1},{"id":134,"name":"Twitter","slug":"twitter","count":1},{"id":93,"name":"Universal","slug":"universal","count":1},{"id":114,"name":"Windows Phone","slug":"windows-phone","count":1},{"id":51,"name":"Workflows","slug":"workflows","count":1},{"id":53,"name":"WP7; SharePoint; SharePoint 2010; Social; Mobile","slug":"wp7-sharepoint-sharepoint-2010-social-mobile","count":1},{"id":147,"name":"XCode","slug":"xcode","count":1}],"recentPosts":[{"id":2222,"slug":"how-to-reauthenticate-claude-in-xcode","title":"HOW TO: Reauthenticate Claude in XCode","content":"\n

If you set up XCode to integrate with Claude you may find the OAuth token expires and the chat in XCode cannot communicate with Claude, then you see this error message.

OAuth token has expired. Please obtain a new token or refresh your existing token.

\n\n\n\n

\n\n\n\n

To resolve this issue quickly open XCode Settings > Intelligence.

\n\n\n\n

Click the ellipses next to your account, and select Sign Out.

\n\n\n\n

\n\n\n\n

Click the ellipses again and select Sign In.

\n\n\n\n

This will open a web browser where you can sign in and click Authorize.

\n\n\n\n

Restart XCode.

\n\n\n\n

\n\n\n\n

Happy coding!

\n","excerpt":"

If you set up XCode to integrate with Claude you may find the OAUth token expires and the chat in XCode cannot communicate with Claude. Here's how to fix it.

","date":"2026-04-01T21:22:55","modified":"2026-04-01T21:22:57","author":"Todd Baginski","authorSlug":"todd","categories":[{"id":146,"name":"AI","slug":"ai","count":1}],"tags":[{"id":148,"name":"Claude","slug":"claude","count":1},{"id":10,"name":"Custom Development","slug":"custom-development","count":87},{"id":147,"name":"XCode","slug":"xcode","count":1}],"featuredImage":"/blog/uploads/2026/04/xcode-claude.png","status":"publish"},{"id":2165,"slug":"how-to-disable-turn-off-a-power-platform-managed-environment","title":"HOW TO: Disable/Turn Off a Power Platform Managed Environment","content":"\n

What do you do if you accidentally enabled a Managed Environment in the Power Platform and you want to make the Environment non-Managed again? There is no way in the Power Platform Admin Center to Disable / Turn Off a Managed Environment, you can only Enable or Delete Managed Environments in the Admin Center. To Disable / Turn Off a Managed Environment, and go back to a non-Managed Environment, you must use PowerShell. Here's how to do it:

\n\n\n\n

Open a PowerShell prompt as Administrator.

\n\n\n\n

Install PowerShell

\n\n\n\n

Install-Module -Name Microsoft.PowerApps.Administration.PowerShell

\n\n\n\n

Log in with an account that has permissions to administer Environments. The following command will open an authentication prompt. The prompt supports MFA.

\n\n\n\n

Add-PowerAppsAccount -Endpoint prod

\n\n\n\n

Run this code that sets protectionLevel to Basic, which turns an Environment from Managed to non-Managed.

\n\n\n\n

$UpdatedGovernanceConfiguration = [pscustomobject]@{ protectionLevel = \"Basic\" }

\n\n\n\n

Run this command to apply the changes to the Environment you want to convert from Managed to non-Managed. Make sure to replace the Environment Id accordingly.

\n\n\n\n

Set-AdminPowerAppEnvironmentGovernanceConfiguration -EnvironmentName -UpdatedGovernanceConfiguration $UpdatedGovernanceConfiguration

\n\n\n\n

Here's what it all looks like:

\n\n\n\n

\n\n\n\n

Here's the Microsoft documentation that describes part of this process.

\n\n\n\n

https://learn.microsoft.com/en-us/power-platform/admin/managed-environment-enable#disable-managed-environments-using-powershell

\n\n\n\n

\n","excerpt":"

What do you do if you accidentally enabled a Managed Environment in the Power Platform and you want to make the Environment non-Managed again?

","date":"2024-10-15T16:47:48","modified":"2024-10-15T16:47:49","author":"Todd Baginski","authorSlug":"todd","categories":[{"id":103,"name":"Cloud","slug":"cloud","count":68},{"id":120,"name":"Flow","slug":"flow","count":18},{"id":104,"name":"Office 365","slug":"office-365","count":80},{"id":121,"name":"PowerApps","slug":"powerapps","count":57}],"tags":[{"id":42,"name":"Cloud","slug":"cloud","count":46},{"id":10,"name":"Custom Development","slug":"custom-development","count":87},{"id":5,"name":"Helpful Code","slug":"helpful-code","count":70},{"id":122,"name":"HOW TO: PowerApps","slug":"how-to-powerapps","count":38},{"id":54,"name":"Mobile","slug":"mobile","count":66},{"id":112,"name":"PowerApps","slug":"powerapps","count":56}],"featuredImage":"/blog/uploads/2024/10/sunset-ocean.jpg","status":"publish"},{"id":2143,"slug":"how-to-make-a-diy-lacrosse-goal-transporter","title":"HOW TO: Make a DIY lacrosse goal transporter","content":"\n

\n\n\n\n

Hopefully this article helps out my brothers and sisters in the lax community.

\n\n\n\n

\n\n\n\n

Parts

\n\n\n\n

1 - 4x4x8' #2 Ground Contact Green pressure-treated timber - $10.30

\n\n\n\n

1 - 2x4x8' #2 Ground Contact Green pressure treated lumber - $3.89

\n\n\n\n

1 - 21\" #2 Ground Contact Green pressure-treated timber - $0.00 *

\n\n\n\n

19 - #9 2 1/2\" coated deck screws - $0.00 *

\n\n\n\n

2 - 5/8\" x 8\" galvanized lag screws - $3.39 (these become the wheel axles)

\n\n\n\n

2 - 8\" Pneumatic Utility Tire (no flat) - $20.57 (comes with plastic spacers - you could cut a small pipe to make a spacer too)

\n\n\n\n

* Already had these items in my shop from previous projects.

\n\n\n\n

Total: $38.15

\n\n\n\n

Instructions

\n\n\n\n

Lay the goal on top of the 4x4.

\n\n\n\n

Cut the 4x4 to the length that makes sense for your goal. I went with 80\" for my 4x4.

\n\n\n\n

Use a large socket wrench to un-screw the lag screws from the 4x4 all the way. Be careful when you take out the lag screw, it could be quite hot from the friction.

\n\n\n\n

Lay the goal on top of the 4x4 and center it.

\n\n\n\n

This picture shows the pieces described in the next set of steps.

\n\n\n\n

\n\n\n\n

Cut some of the 21\" 2x4 to make little stoppers for top ends of the 4x4. You will do this 2 times, one for each end.

\n\n\n\n

Screw the stoppers to the 4x4 with the deck screws. You will do this 2 times, one for each end.

\n\n\n\n

Cut some 2x4 to make a brace for the goal posts to prevent the goal from sliding off the 4x4. I made my braces 8\" long. You will do this 2 times, one for each goal post.

\n\n\n\n

Screw the brace to the 4x4 with the deck screws. You will do this 2 times, one for each end.

\n\n\n\n

This picture shows the pieces described in the next set of steps.

\n\n\n\n

\n\n\n\n

Screw the 2x4 to the 4x4 with the deck screws.

\n\n\n\n

This picture shows the pieces described in the next set of steps.

\n\n\n\n

\n\n\n\n

Pass the lag screw through the wheel, add the spacer on the other side, then use the large socket wrench to tighten the screw. You will do this 2 times, one for each end.

\n\n\n\n

Walk around the back of your goal and grab the 2x4 and lift up the goal.

\n\n\n\n

\n\n\n\n

\n\n\n\n

Move your goal to a suitable location and rip some Gs!

\n\n\n\n

\n\n\n\n

Here are some more pictures that show everything from a few different angles.

\n\n\n\n

\n\n\n\n

\n\n\n\n

\n\n\n\n

\n\n\n\n

\n","excerpt":"

There are several products on the market that make it easy to move your lacrosse goal. I investigated them and then created my own to save my yard, my back, and my money.

This video demonstrates how to accelerate development with the Catalog for Power Platform in both green field (creating a new app from scratch) and enhancement (taking an existing app and updating it) scenarios.

\n\n\n\n

In this video you will learn how to add Solutions to the Catalog and how to deploy them to Power Platform environments. You will also learn how to organize your Solutions and reusable components to enable quick app development and streamlined enhancements and maintenance.

\n\n\n\n

\n","excerpt":"

Learn how to accelerate development with the Catalog for Power Platform in both green field (creating a new app from scratch) and enhancement (taking an existing app and updating it) scenarios.

","date":"2023-05-25T13:30:00","modified":"2023-05-25T17:49:54","author":"Todd Baginski","authorSlug":"todd","categories":[{"id":103,"name":"Cloud","slug":"cloud","count":68},{"id":120,"name":"Flow","slug":"flow","count":18},{"id":104,"name":"Office 365","slug":"office-365","count":80},{"id":121,"name":"PowerApps","slug":"powerapps","count":57}],"tags":[{"id":42,"name":"Cloud","slug":"cloud","count":46},{"id":10,"name":"Custom Development","slug":"custom-development","count":87},{"id":5,"name":"Helpful Code","slug":"helpful-code","count":70},{"id":122,"name":"HOW TO: PowerApps","slug":"how-to-powerapps","count":38},{"id":54,"name":"Mobile","slug":"mobile","count":66}],"featuredImage":"/blog/uploads/2019/08/succulent-garden.jpg","status":"publish"},{"id":2125,"slug":"what-is-the-catalog-for-power-platform","title":"What is the Catalog for Power Platform?","content":"\n

In this video you will learn the basics about the Catalog for Power Platform and how the Catalog for Power Platform accelerates development and promotes consistency by making it easy for makers to discover and reuse Power Platform components.

\n\n\n\n

After you watch this video, check out these other great videos about the Catalog for Power Platform and related concepts.

\n\n\n\n

Accelerate development with the Catalog for Power Platform

\n\n\n\n

Sharing PCF Components with the Catalog in Power Platform

\n\n\n\n

Power Platform ALM - Choose the Right Approach

\n\n\n\n

\n","excerpt":"

Learn the basics about the Catalog for Power Platform and how the Catalog for Power Platform accelerates development.

","date":"2023-05-25T13:30:00","modified":"2023-05-25T17:52:48","author":"Todd Baginski","authorSlug":"todd","categories":[{"id":103,"name":"Cloud","slug":"cloud","count":68},{"id":120,"name":"Flow","slug":"flow","count":18},{"id":104,"name":"Office 365","slug":"office-365","count":80},{"id":121,"name":"PowerApps","slug":"powerapps","count":57}],"tags":[{"id":42,"name":"Cloud","slug":"cloud","count":46},{"id":10,"name":"Custom Development","slug":"custom-development","count":87},{"id":5,"name":"Helpful Code","slug":"helpful-code","count":70},{"id":122,"name":"HOW TO: PowerApps","slug":"how-to-powerapps","count":38},{"id":54,"name":"Mobile","slug":"mobile","count":66},{"id":112,"name":"PowerApps","slug":"powerapps","count":56}],"featuredImage":"/blog/uploads/2018/01/Ducks-Little-Miami.jpg","status":"publish"}]}},"actionData":null,"errors":null}

CategoryLacrosse

HOW TO: Make a DIY lacrosse goal transporter